* Improve error handling on LinkCrawlWorker
* Ignore TimeoutError and InvalidURIError too
* Record errors to debug log
* Enable dead job queue on LinkCrawlWorker
Since most of acceptable errors were already ignored, only our side issue should go to dead job queue.
* Ignore all http gem errors
* Fix#2102 - Implement hotkeys
Hotkeys on status list:
- r to reply
- m to mention author
- f to favourite
- b to boost
- enter to open status
- p to open author's profile
- up or k to move up in the list
- down or j to move down in the list
- 1-9 to focus a status in one of the columns
- n to focus the compose textarea
- alt+n to start a brand new toot
- backspace to navigate back
* Add navigational hotkeys
The key g followed by:
- s: start
- h: home
- n: notifications
- l: local timeline
- t: federated timeline
- f: favourites
- u: own profile
- p: pinned toots
- b: blocked users
- m: muted users
* Add hotkey for focusing search, make escape un-focus compose/search
* Fix focusing notifications column, fix hotkeys in compose textarea
The whole point of verified_webfinger? is to check the WebFinger-discoverable
URI maps back to the known author URI. This was not actually verified if the
first Webfinger request was not a redirection.
* Use non-serial IDs
This change makes a number of nontrivial tweaks to the data model in
Mastodon:
* All IDs are now 8 byte integers (rather than mixed 4- and 8-byte)
* IDs are now assigned as:
* Top 6 bytes: millisecond-resolution time from epoch
* Bottom 2 bytes: serial (within the millisecond) sequence number
* See /lib/tasks/db.rake's `define_timestamp_id` for details, but
note that the purpose of these changes is to make it difficult to
determine the number of objects in a table from the ID of any
object.
* The Redis sorted set used for the feed will have values used to look
up toots, rather than scores. This is almost always the same as the
existing behavior, except in the case of boosted toots. This change
was made because Redis stores scores as double-precision floats,
which cannot store the new ID format exactly. Note that this doesn't
cause problems with sorting/pagination, because ZREVRANGEBYSCORE
sorts lexicographically when scores are tied. (This will still cause
sorting issues when the ID gains a new significant digit, but that's
extraordinarily uncommon.)
Note a couple of tradeoffs have been made in this commit:
* lib/tasks/db.rake is used to enforce many/most column constraints,
because this commit seems likely to take a while to bring upstream.
Enforcing a post-migrate hook is an easier way to maintain the code
in the interim.
* Boosted toots will appear in the timeline as many times as they have
been boosted. This is a tradeoff due to the way the feed is saved in
Redis at the moment, but will be handled by a future commit.
This would effectively close Mastodon's #1059, as it is a
snowflake-like system of generating IDs. However, given how involved
the changes were simply within Mastodon, it may have unexpected
interactions with some clients, if they store IDs as doubles
(or as 4-byte integers). This was a problem that Twitter ran into with
their "snowflake" transition, particularly in JavaScript clients that
treated IDs as JS integers, rather than strings. It therefore would be
useful to test these changes at least in the web interface and popular
clients before pushing them to all users.
* Fix JavaScript interface with long IDs
Somewhat predictably, the JS interface handled IDs as numbers, which in
JS are IEEE double-precision floats. This loses some precision when
working with numbers as large as those generated by the new ID scheme,
so we instead handle them here as strings. This is relatively simple,
and doesn't appear to have caused any problems, but should definitely
be tested more thoroughly than the built-in tests. Several days of use
appear to support this working properly.
BREAKING CHANGE:
The major(!) change here is that IDs are now returned as strings by the
REST endpoints, rather than as integers. In practice, relatively few
changes were required to make the existing JS UI work with this change,
but it will likely hit API clients pretty hard: it's an entirely
different type to consume. (The one API client I tested, Tusky, handles
this with no problems, however.)
Twitter ran into this issue when introducing Snowflake IDs, and decided
to instead introduce an `id_str` field in JSON responses. I have opted
to *not* do that, and instead force all IDs to 64-bit integers
represented by strings in one go. (I believe Twitter exacerbated their
problem by rolling out the changes three times: once for statuses, once
for DMs, and once for user IDs, as well as by leaving an integer ID
value in JSON. As they said, "If you’re using the `id` field with JSON
in a Javascript-related language, there is a very high likelihood that
the integers will be silently munged by Javascript interpreters. In most
cases, this will result in behavior such as being unable to load or
delete a specific direct message, because the ID you're sending to the
API is different than the actual identifier associated with the
message." [1]) However, given that this is a significant change for API
users, alternatives or a transition time may be appropriate.
1: https://blog.twitter.com/developer/en_us/a/2011/direct-messages-going-snowflake-on-sep-30-2011.html
* Restructure feed pushes/unpushes
This was necessary because the previous behavior used Redis zset scores
to identify statuses, but those are IEEE double-precision floats, so we
can't actually use them to identify all 64-bit IDs. However, it leaves
the code in a much better state for refactoring reblog handling /
coalescing.
Feed-management code has been consolidated in FeedManager, including:
* BatchedRemoveStatusService no longer directly manipulates feed zsets
* RemoveStatusService no longer directly manipulates feed zsets
* PrecomputeFeedService has moved its logic to FeedManager#populate_feed
(PrecomputeFeedService largely made lots of calls to FeedManager, but
didn't follow the normal adding-to-feed process.)
This has the effect of unifying all of the feed push/unpush logic in
FeedManager, making it much more tractable to update it in the future.
Due to some additional checks that must be made during, for example,
batch status removals, some Redis pipelining has been removed. It does
not appear that this should cause significantly increased load, but if
necessary, some optimizations are possible in batch cases. These were
omitted in the pursuit of simplicity, but a batch_push and batch_unpush
would be possible in the future.
Tests were added to verify that pushes happen under expected conditions,
and to verify reblog behavior (both on pushing and unpushing). In the
case of unpushing, this includes testing behavior that currently leads
to confusion such as Mastodon's #2817, but this codifies that the
behavior is currently expected.
* Rubocop fixes
I could swear I made these changes already, but I must have lost them
somewhere along the line.
* Address review comments
This addresses the first two comments from review of this feature:
https://github.com/tootsuite/mastodon/pull/4801#discussion_r139336735https://github.com/tootsuite/mastodon/pull/4801#discussion_r139336931
This adds an optional argument to FeedManager#key, the subtype of feed
key to generate. It also tests to ensure that FeedManager's settings are
such that reblogs won't be tracked forever.
* Hardcode IdToBigints migration columns
This addresses a comment during review:
https://github.com/tootsuite/mastodon/pull/4801#discussion_r139337452
This means we'll need to make sure that all _id columns going forward
are bigints, but that should happen automatically in most cases.
* Additional fixes for stringified IDs in JSON
These should be the last two. These were identified using eslint to try
to identify any plain casts to JavaScript numbers. (Some such casts are
legitimate, but these were not.)
Adding the following to .eslintrc.yml will identify casts to numbers:
~~~
no-restricted-syntax:
- warn
- selector: UnaryExpression[operator='+'] > :not(Literal)
message: Avoid the use of unary +
- selector: CallExpression[callee.name='Number']
message: Casting with Number() may coerce string IDs to numbers
~~~
The remaining three casts appear legitimate: two casts to array indices,
one in a server to turn an environment variable into a number.
* Only implement timestamp IDs for Status IDs
Per discussion in #4801, this is only being merged in for Status IDs at
this point. We do this in a migration, as there is no longer use for
a post-migration hook. We keep the initialization of the timestamp_id
function as a Rake task, as it is also needed after db:schema:load (as
db/schema.rb doesn't store Postgres functions).
* Change internal streaming payloads to stringified IDs as well
This is equivalent to 591a9af356faf2d5c7e66e3ec715502796c875cd from
#5019, with an extra change for the addition to FeedManager#unpush.
* Ensure we have a status_id_seq sequence
Apparently this is not a given when specifying a custom ID function,
so now we ensure it gets created. This uses the generic version of this
function to more easily support adding additional tables with timestamp
IDs in the future, although it would be possible to cut this down to a
less generic version if necessary. It is only run during db:schema:load
or the relevant migration, so the overhead is extraordinarily minimal.
* Transition reblogs to new Redis format
This provides a one-way migration to transition old Redis reblog entries
into the new format, with a separate tracking entry for reblogs.
It is not invertible because doing so could (if timestamp IDs are used)
require a database query for each status in each users' feed, which is
likely to be a significant toll on major instances.
* Address review comments from @akihikodaki
No functional changes.
* Additional review changes
* Heredoc cleanup
* Run db:schema:load hooks for test in development
This matches the behavior in Rails'
ActiveRecord::Tasks::DatabaseTasks.each_current_configuration, which
would otherwise break `rake db:setup` in development.
It also moves some functionality out to a library, which will be a good
place to put additional related functionality in the near future.
Additionally, ActivityPub::FetchRemoteStatusService no longer parses
activities.
OStatus::Activity::Creation no longer delegates to ActivityPub because
the provided ActivityPub representations are not signed while OStatus
representations are.
* Return sensible HTTP status for ActivityPub inbox processing
* Return sensible HTTP status for salmon slap processing
* Return additional information to debug signature verification failures
* Add pagination in media modal
* Change array name
* Add an element class
* Avoid nested class
* Pull out the active class
* Use map instead of forEach
* Remove parentheses
* yarn manage:translations
* Add Japanese translations for #5170
* Add Japanese translations for #5123
* Add Japanese translations for #5046
* Add Japanese translations for #5099
* Add Japanese translations for #5161
* "項目" -> "絵文字"
aria-label contained body of status with content warning, which should be
hidden by default. Remove the label for the case and other cases due to
consistency.
* Make IdsToBigints (mostly!) non-blocking
This pulls in GitLab's MigrationHelpers, which include code to make
column changes in ways that Postgres can do without locking. In general,
this involves creating a new column, adding an index and any foreign
keys as appropriate, adding a trigger to keep it populated alongside
the old column, and then progressively copying data over to the new
column, before removing the old column and replacing it with the new
one.
A few changes to GitLab's MigrationHelpers were necessary:
* Some changes were made to remove dependencies on other GitLab code.
* We explicitly wait for index creation before forging ahead on column
replacements.
* We use different temporary column names, to avoid running into index
name length limits.
* We rename the generated indices back to what they "should" be after
replacing columns.
* We rename the generated foreign keys to use the new column names when
we had to create them. (This allows the migration to be rolled back
without incident.)
# Big Scary Warning
There are two things here that may trip up large instances:
1. The change for tables' "id" columns is not concurrent. In
particular, the stream_entries table may be big, and does not
concurrently migrate its id column. (On the other hand, x_id type
columns are all concurrent.)
2. This migration will take a long time to run, *but it should not
lock tables during that time* (with the exception of the "id"
columns as described above). That means this should probably be run
in `screen` or some other session that can be run for a long time.
Notably, the migration will take *longer* than it would without
these changes, but the website will still be responsive during that
time.
These changes were tested on a relatively large statuses table (256k
entries), and the service remained responsive during the migration.
Migrations both forward and backward were tested.
* Rubocop fixes
* MigrationHelpers: Support ID columns in some cases
This doesn't work in cases where the ID column is referred to as a
foreign key by another table.
* MigrationHelpers: support foreign keys for ID cols
Note that this does not yet support foreign keys on non-primary-key
columns, but Mastodon also doesn't yet have any that we've needed to
migrate.
This means we can perform fully "concurrent" migrations to change ID
column types, and the IdsToBigints migration can happen with effectively
no downtime. (A few operations require a transaction, such as renaming
columns or deleting them, but these transactions should not block for
noticeable amounts of time.)
The algorithm for generating foreign key names has changed with this,
and therefore all of those changed in schema.rb.
* Provide status, allow for interruptions
The MigrationHelpers now allow restarting the rename of a column if it
was interrupted, by removing the old "new column" and re-starting the
process.
Along with this, they now provide status updates on the changes which
are happening, as well as indications about when the changes can be
safely interrupted (when there are at least 10 seconds estimated to be
left before copying data is complete).
The IdsToBigints migration now also sorts the columns it migrates by
size, starting with the largest tables. This should provide
administrators a worst-case scenario estimate for the length of
migrations: each successive change will get faster, giving admins a
chance to abort early on if they need to run the migration later. The
idea is that this does not force them to try to time interruptions
between smaller migrations.
* Fix column sorting in IdsToBigints
Not a significant change, but it impacts the order of columns in the
database and db/schema.rb.
* Actually pause before IdsToBigints
* Fix order of paginated accounts in FollowerDomainsController
Unordered pagination could result in unexpected behavior.
* Cover Settings::FollowerDomainsController more
Translate "about" page, several settings pages, data export/import,
sessions overview, authorized followers page, account deletion page.
More consistent use of words:
- A toot is a Beitrag.
- An account is a Konto.
Some small improvements.
I see no reason to allow more than that. Usually a redirect is
HTTP->HTTPS, then maybe URL structure changed, but more than that
is highly unlikely to be a legitimate use case.
If the signature could not be verified and the webfinger of the account
was last retrieved longer than the cache period, try re-resolving the
account and then attempting to verify the signature again
* Fix#117 - Add ability to specify alternative text for media attachments
- POST /api/v1/media accepts `description` straight away
- PUT /api/v1/media/:id to update `description` (only for unattached ones)
- Serialized as `name` of Document object in ActivityPub
- Uploads form adjusted for better performance and description input
* Add tests
* Change undo button blend mode to difference
- Previously they wouldn't receive it unless they were author's
followers
- Skip unpush from public/hashtag timelines if status wasn't
public in the first place
- 500.html generated with admin-set default locale if set
- Error page `<title>` includes Mastodon site title
- 500 title changed to "This page is not
correct" (ref: <https://www.youtube.com/watch?v=2VCAP_seh1A>)
- 500 content appended with "on our end" to make clear it's
not user's fault
A new rake task emojis:generate downloads a full list of valid
unicode sequences from unicode.org and checks it against existing
Twemoji files, finally generating a map from each sequence to the
existing file (e.g. when there's multiple ways an emoji can be
expressed). The map is dumped into app/javascript/mastodon/emoji_map.json
That file is loaded by emojione_light.js (now a misnomer) which
decorates it further with shortcodes taken from emoji-mart's index.
We added horizontal layout to preview card for wide image. However, max height of the thumbnail is still limited to 120px and it makes nearly square images to too small for that layout.
This PR increases max height as well as max width.
* Add emoji autosuggest
Some credit goes to glitch-soc/mastodon#149
* Remove server-side shortcode->unicode conversion
* Insert shortcode when suggestion is custom emoji
* Remove remnant of server-side emojis
* Update style of autosuggestions
* Fix wrong emoji filenames generated in autosuggest item
* Do not lazy load emoji picker, as that no longer works
* Fix custom emoji autosuggest
* Fix multiple "Custom" categories getting added to emoji index, only add once
Currently we're using a list of MIME types for `accept` attribute on `input[type="file"]` for filter options of file picker, and actual file extensions will be infered by browsers. However, infered extensions may not include our expected items. For example, "image/jpeg" seems to be infered to
only ".jfif" extension in Firefox.
To ensure common file extensions are in the list, this PR adds file extensions in addition to MIME types. Also having items in both format is encouraged by HTML5 spec.
https://www.w3.org/TR/html5/forms.html#file-upload-state-(type=file)
* Fix JavaScript interface with long IDs
Somewhat predictably, the JS interface handled IDs as numbers, which in
JS are IEEE double-precision floats. This loses some precision when
working with numbers as large as those generated by the new ID scheme,
so we instead handle them here as strings. This is relatively simple,
and doesn't appear to have caused any problems, but should definitely
be tested more thoroughly than the built-in tests. Several days of use
appear to support this working properly.
BREAKING CHANGE:
The major(!) change here is that IDs are now returned as strings by the
REST endpoints, rather than as integers. In practice, relatively few
changes were required to make the existing JS UI work with this change,
but it will likely hit API clients pretty hard: it's an entirely
different type to consume. (The one API client I tested, Tusky, handles
this with no problems, however.)
Twitter ran into this issue when introducing Snowflake IDs, and decided
to instead introduce an `id_str` field in JSON responses. I have opted
to *not* do that, and instead force all IDs to 64-bit integers
represented by strings in one go. (I believe Twitter exacerbated their
problem by rolling out the changes three times: once for statuses, once
for DMs, and once for user IDs, as well as by leaving an integer ID
value in JSON. As they said, "If you’re using the `id` field with JSON
in a Javascript-related language, there is a very high likelihood that
the integers will be silently munged by Javascript interpreters. In most
cases, this will result in behavior such as being unable to load or
delete a specific direct message, because the ID you're sending to the
API is different than the actual identifier associated with the
message." [1]) However, given that this is a significant change for API
users, alternatives or a transition time may be appropriate.
1: https://blog.twitter.com/developer/en_us/a/2011/direct-messages-going-snowflake-on-sep-30-2011.html
* Additional fixes for stringified IDs in JSON
These should be the last two. These were identified using eslint to try
to identify any plain casts to JavaScript numbers. (Some such casts are
legitimate, but these were not.)
Adding the following to .eslintrc.yml will identify casts to numbers:
~~~
no-restricted-syntax:
- warn
- selector: UnaryExpression[operator='+'] > :not(Literal)
message: Avoid the use of unary +
- selector: CallExpression[callee.name='Number']
message: Casting with Number() may coerce string IDs to numbers
~~~
The remaining three casts appear legitimate: two casts to array indices,
one in a server to turn an environment variable into a number.
* Back out RelationshipsController Change
This was made to make a test a bit less flakey, but has nothing to
do with this branch.
* Change internal streaming payloads to stringified IDs as well
Per
https://github.com/tootsuite/mastodon/pull/5019#issuecomment-330736452
we need these changes to send deleted status IDs as strings, not
integers.
* Add support for selecting a theme
* Fix codeclimate issues
* Look up site default style if current user is not available due to e.g. not being logged in
* Remove outdated comment in common.js
* Address requested changes in themes PR
* Fix codeclimate issues
* Explicitly check current_account in application controller and only check theme availability if non-nil
* codeclimate
* explicit precedence with &&
* Fix code style in application_controller according to @nightpool's suggestion, use default style in embedded.html.haml
* codeclimate: indentation + return
* Custom emoji
- In OStatus: `<link rel="emoji" name="coolcat" href="http://..." />`
- In ActivityPub: `{ type: "Emoji", name: ":coolcat:", href: "http://..." }`
- In REST API: Status object includes `emojis` array (`shortcode`, `url`)
- Domain blocks with reject media stop emojis
- Emoji file up to 50KB
- Web UI handles custom emojis
- Static pages render custom emojis as `<img />` tags
Side effects:
- Undo #4500 optimization, as I needed to modify it to restore
shortcode handling in emojify()
- Formatter#plaintext should now make sure stripped out line-breaks
and paragraphs are replaced with newlines
* Fix emoji at the start not being converted
* So Spanish. Much changes. Wow.
* Some little fixes
* Updated es.yml, and fixed some ortographical errors
* Some little changes to simple_form.es.yml
* Yeah, so much translations
* Spanish e-mail messages
* Remove unused message
We had returned `nil` for that case, but this raises an error instead, as a wrong usage of the method.
This method is currently only used in ActivitySerializer.
* zh-*: transition from "like" back to "fav"
This commit reverts the translation for the yellow-star "fav" button
back to "fav" in Chinese. Some ambuiguity between "like" and "fav" is
deliberately used in zh-TW/HK by using the existing phrase "最爱"
(favorite (adj.), lit. love-most) instead of "收藏" (favourite (v.),
"collect") in some instances.
Fixes#3511.
* zh-*: apply suggestions for PR #4557
* zh-cn: de-monetize ya account
In Chinese two separate characters, 账 and 帐, can be used to spell the
word for account (账/帐户). However, the one with a 贝 on the left is
evolved from the latter specifically for monetary purposes. Since
people usually can't figure out which one to use, it might be a good
idea to use the original not-so-money one.
* zh-*: complete jsx translation
* Adjust landing pages 2
Fix styles of terms page
Remove action buttons from timeline in about page
Adjust styles of short description
Adjust form inputs
Set autocomplete off for username and email box in registration form. Remove line breakings.
* Revert removing action buttons
`Status#reply?` may returns true even if the thread is missing.
e.g. the replied status was deleted or couldn't be fetched.
Then it raises NoMethodError on various AP json serialization.
This issue won't happen on Atom serialization because it checks thread
existence using `StreamEntry#threaded?` instead.
Eugen Rochko
MitarashiDango
Nolan Lawson
kibigo!
Lynx Kotoura
unarist
K.SHIRAKASHI
MIYAGI Hikaru
Ondřej Hruška
ThibG
utam0k
Ryo Kajiwara
Yamagishi Kazutoshi
aschmitz
Akihiko Odaki
m4sk1n
PFM
Jakob Kramer
Jeong Arm
Daigo 3 Dango
Daggertooth
beatrix
abcang
JeanGauthier
Mingye Wang
David Yip
syui
TomoyaShibata
Naoki Kosaka
nullkal
Andrew
BruWalfas
febrezo
Lynx Kotoura
Surinna Curtis
ふぁぼ原