* Make IdsToBigints (mostly!) non-blocking
This pulls in GitLab's MigrationHelpers, which include code to make
column changes in ways that Postgres can do without locking. In general,
this involves creating a new column, adding an index and any foreign
keys as appropriate, adding a trigger to keep it populated alongside
the old column, and then progressively copying data over to the new
column, before removing the old column and replacing it with the new
one.
A few changes to GitLab's MigrationHelpers were necessary:
* Some changes were made to remove dependencies on other GitLab code.
* We explicitly wait for index creation before forging ahead on column
replacements.
* We use different temporary column names, to avoid running into index
name length limits.
* We rename the generated indices back to what they "should" be after
replacing columns.
* We rename the generated foreign keys to use the new column names when
we had to create them. (This allows the migration to be rolled back
without incident.)
# Big Scary Warning
There are two things here that may trip up large instances:
1. The change for tables' "id" columns is not concurrent. In
particular, the stream_entries table may be big, and does not
concurrently migrate its id column. (On the other hand, x_id type
columns are all concurrent.)
2. This migration will take a long time to run, *but it should not
lock tables during that time* (with the exception of the "id"
columns as described above). That means this should probably be run
in `screen` or some other session that can be run for a long time.
Notably, the migration will take *longer* than it would without
these changes, but the website will still be responsive during that
time.
These changes were tested on a relatively large statuses table (256k
entries), and the service remained responsive during the migration.
Migrations both forward and backward were tested.
* Rubocop fixes
* MigrationHelpers: Support ID columns in some cases
This doesn't work in cases where the ID column is referred to as a
foreign key by another table.
* MigrationHelpers: support foreign keys for ID cols
Note that this does not yet support foreign keys on non-primary-key
columns, but Mastodon also doesn't yet have any that we've needed to
migrate.
This means we can perform fully "concurrent" migrations to change ID
column types, and the IdsToBigints migration can happen with effectively
no downtime. (A few operations require a transaction, such as renaming
columns or deleting them, but these transactions should not block for
noticeable amounts of time.)
The algorithm for generating foreign key names has changed with this,
and therefore all of those changed in schema.rb.
* Provide status, allow for interruptions
The MigrationHelpers now allow restarting the rename of a column if it
was interrupted, by removing the old "new column" and re-starting the
process.
Along with this, they now provide status updates on the changes which
are happening, as well as indications about when the changes can be
safely interrupted (when there are at least 10 seconds estimated to be
left before copying data is complete).
The IdsToBigints migration now also sorts the columns it migrates by
size, starting with the largest tables. This should provide
administrators a worst-case scenario estimate for the length of
migrations: each successive change will get faster, giving admins a
chance to abort early on if they need to run the migration later. The
idea is that this does not force them to try to time interruptions
between smaller migrations.
* Fix column sorting in IdsToBigints
Not a significant change, but it impacts the order of columns in the
database and db/schema.rb.
* Actually pause before IdsToBigints
If the signature could not be verified and the webfinger of the account
was last retrieved longer than the cache period, try re-resolving the
account and then attempting to verify the signature again
* Fix#117 - Add ability to specify alternative text for media attachments
- POST /api/v1/media accepts `description` straight away
- PUT /api/v1/media/:id to update `description` (only for unattached ones)
- Serialized as `name` of Document object in ActivityPub
- Uploads form adjusted for better performance and description input
* Add tests
* Change undo button blend mode to difference
We added horizontal layout to preview card for wide image. However, max height of the thumbnail is still limited to 120px and it makes nearly square images to too small for that layout.
This PR increases max height as well as max width.
* Add emoji autosuggest
Some credit goes to glitch-soc/mastodon#149
* Remove server-side shortcode->unicode conversion
* Insert shortcode when suggestion is custom emoji
* Remove remnant of server-side emojis
* Update style of autosuggestions
* Fix wrong emoji filenames generated in autosuggest item
* Do not lazy load emoji picker, as that no longer works
* Fix custom emoji autosuggest
* Fix multiple "Custom" categories getting added to emoji index, only add once
Currently we're using a list of MIME types for `accept` attribute on `input[type="file"]` for filter options of file picker, and actual file extensions will be infered by browsers. However, infered extensions may not include our expected items. For example, "image/jpeg" seems to be infered to
only ".jfif" extension in Firefox.
To ensure common file extensions are in the list, this PR adds file extensions in addition to MIME types. Also having items in both format is encouraged by HTML5 spec.
https://www.w3.org/TR/html5/forms.html#file-upload-state-(type=file)
* Add support for selecting a theme
* Fix codeclimate issues
* Look up site default style if current user is not available due to e.g. not being logged in
* Remove outdated comment in common.js
* Address requested changes in themes PR
* Fix codeclimate issues
* Explicitly check current_account in application controller and only check theme availability if non-nil
* codeclimate
* explicit precedence with &&
* Fix code style in application_controller according to @nightpool's suggestion, use default style in embedded.html.haml
* codeclimate: indentation + return
* Custom emoji
- In OStatus: `<link rel="emoji" name="coolcat" href="http://..." />`
- In ActivityPub: `{ type: "Emoji", name: ":coolcat:", href: "http://..." }`
- In REST API: Status object includes `emojis` array (`shortcode`, `url`)
- Domain blocks with reject media stop emojis
- Emoji file up to 50KB
- Web UI handles custom emojis
- Static pages render custom emojis as `<img />` tags
Side effects:
- Undo #4500 optimization, as I needed to modify it to restore
shortcode handling in emojify()
- Formatter#plaintext should now make sure stripped out line-breaks
and paragraphs are replaced with newlines
* Fix emoji at the start not being converted
They are marked as read-only by Rails, but we know what we are doing,
so we are un-marking them as such.
The mastodon:maintenance:update_counter_caches task is not really
supposed to be run anymore (it was a one-time thing during an upgrade)
however, just in case, I have modified it to not touch ActivityPub
accounts.
Also, no point writing to logger from these rake tasks, since they
are not to be run from cron. Better to give stdout feedback.
When a new user confirms their e-mail, bootstrap their home timeline
by automatically following a set of accounts. By default, all local
admin accounts (that are unlocked). Can be customized by new admin
setting (comma-separated usernames, local and unlocked only)
* Decouple Status#local? from uri being nil
* Replace on-the-fly URI generation with stored URIs
- Generate URI in after_save hook for local statuses
- Use static value in TagManager when available, fallback to tag format
- Make TagManager use ActivityPub::TagManager to understand new format
- Adjust tests
* Use other heuristic for locality of old statuses, do not perform long query
* Exclude tombstone stream entries from Atom feed
* Prevent nil statuses from landing in Pubsubhubbub::DistributionWorker
* Fix URI not being saved (#4818)
* Add more specs for Status
* Save generated uri immediately
and also fix method order to minimize diff.
* Fix alternate HTML URL in Atom
* Fix tests
* Remove not-null constraint from statuses migration to speed it up
* Make PreviewCard records reuseable between statuses
**Warning!** Migration truncates preview_cards tablec
* Allow a wider thumbnail for link preview, display it in horizontal layout (#4648)
* Delete preview cards files before truncating
* Rename old table instead of truncating it
* Add mastodon:maintenance:remove_deprecated_preview_cards
* Ignore deprecated_preview_cards in schema definition
* Fix null behaviour
* Refactor Web::PushSubscription, remove welcome message
* Add missing helper
* Use locale of the receiver on push notifications (#4519)
* Remove unused translations
* Fix dir on notifications
Requires moving Atom rendering from DistributionWorker (where
`stream_entry.status` is already nil) to inline (where
`stream_entry.status.destroyed?` is true) and distributing that.
Unfortunately, such XML renderings can no longer be easily chained
together into one payload of n items.
* Allow multiple pinned statuses to be shown and make them be ordered by pinned date
* Set timestamps NOT NULL
* Make single-line pinned_statuses
* Spec for pinned_statuses
* Remove redundant empty line
* Add code for creating/managing apps to settings section
* Add specs for app changes
* Fix controller spec
* Fix view file I pasted over by mistake
* Add locale strings. Add 'my apps' to nav
* Add Client ID/Secret to App page. Add some visual separation
* Fix rubocop warnings
* Fix embarrassing typo
I lost an `end` statement while fixing a merge conflict.
* Add code for creating/managing apps to settings section
- Add specs for app changes
- Add locale strings. Add 'my apps' to nav
- Add Client ID/Secret to App page. Add some visual separation
- Fix some bugs/warnings
* Update to match code standards
* Trigger notification
* Add warning about not sharing API secrets
* Tweak spec a bit
* Cleanup fixture creation by using let!
* Remove unused key
* Add foreign key for application<->user
* Add ActivityPub inbox
* Handle ActivityPub deletes
* Handle ActivityPub creates
* Handle ActivityPub announces
* Stubs for handling all activities that need to be handled
* Add ActivityPub actor resolving
* Handle conversation URI passing in ActivityPub
* Handle content language in ActivityPub
* Send accept header when fetching actor, handle JSON parse errors
* Test for ActivityPub::FetchRemoteAccountService
* Handle public key and icon/image when embedded/as array/as resolvable URI
* Implement ActivityPub::FetchRemoteStatusService
* Add stubs for more interactions
* Undo activities implemented
* Handle out of order activities
* Hook up ActivityPub to ResolveRemoteAccountService, handle
Update Account activities
* Add fragment IDs to all transient activity serializers
* Add tests and fixes
* Add stubs for missing tests
* Add more tests
* Add more tests
* Revert "Adjust tags and accounts page (#4534)"
This reverts commit a3e53bd442.
* Revert "feat: Cache status height to avoid expensive renders (#4439)"
This reverts commit 8eb6d171e6.
* Revert "Refactor Avatar and AvatarOverlay to have 'account' as prop instead of src and staticSrc (#4526)"
This reverts commit 5942347407.
* Revert "Update dependencies for Ruby (#4543)"
This reverts commit 22db947225.
* Revert "[Docker] Add multicore support to "make" and "bundler" (#4544)"
This reverts commit 5d408fd9aa.
* Revert "It makes no sense to try using invalid or expired link again (#4521)"
This reverts commit 47579ec58c.
* Revert "i18n: Update Polish translation (#4545)"
This reverts commit 3363a05539.
* Revert "Set false to animated options for thumbnail processor (#4547)"
This reverts commit 87f10d476c.
* Allow domain blocks to reject media without silencing or suspending
* Fix typo
* Hide 'Reject media' button when superfluous, instead of disabling it
* Properly hide 'reject media' checkbox on page load if needed
This may happen when resubmitting the domain block form after an error.
* Don't ask whether undoing a media-only block should be retroactive
* Rename :media_only block to :noop
* Display :noop block as None in frontend, allow blocks that do nothing
* Remove 'coding' line auto-added by emacs
* Add Request class with HTTP signature generator
Spec: https://tools.ietf.org/html/draft-cavage-http-signatures-06
* Add HTTP signature verification concern
* Add test for SignatureVerification concern
* Add basic test for Request class
* Make PuSH subscribe/unsubscribe requests use new Request class
Accidentally fix lease_seconds not being set and sent properly, and
change the new minimum subscription duration to 1 day
* Make all PuSH workers use new Request class
* Make Salmon sender use new Request class
* Make FetchLinkService use new Request class
* Make FetchAtomService use the new Request class
* Make Remotable use the new Request class
* Make ResolveRemoteAccountService use the new Request class
* Add more tests
* Allow +-30 seconds window for signed request to remain valid
* Disable time window validation for signed requests, restore 7 days
as PuSH subscription duration (which was previous default due to a bug)
- Use unicode when selecting emoji through picker
- Convert shortcodes to unicode when storing text input server-side
- Do not convert shortcodes in JS anymore
* add a system_font_ui setting on the server
* Plug the system_font_ui on the front-end
* add EN/FR locales for the new setting
* put Roboto after all other fonts
* remove trailing whitespace so CodeClimate is happy
* fix user_spec.rb
* correctly write user_spect this time
* slightly better way of adding the classes
* add comments to the system-font stack for clarification
* use .system-font for the class instead
* don't use multiple lines for comments
* remove trailing whitespace
* use the classnames module for consistency
* use `mastodon-font-sans-serif` instead of Roboto directly
In from_redis method, statuses retrieved from the database was mapped to
the IDs retrieved from Redis. It was equivalent to order from high to low
because those IDs are sorted in the same order.
Statuses are ordered with the ID by default, so we do not have to reorder.
Sorting statuses in the database is even faster since the IDs are indexed
with B-tree.
* Add overview of active sessions
* Better display of browser/platform name
* Improve how browser information is stored and displayed for sessions overview
* Fix test
* Fix#2347 - Bind web UI access token to session
When you logout, session also destroys the access token, so it's no longer
valid. If access token is destroyed some other way, the session is also
destroyed, requiring a re-login.
Fix#1681 - Add scheduler to remove revoked access tokens and grants
* Fix test
* Add overview of active sessions
* Better display of browser/platform name
* Improve how browser information is stored and displayed for sessions overview
* Fix test
* Introduce domains method to Account relation
Account had followers_domains method, which was excessively specific.
Let relation of Account have domains method instead.
* Move follow_mapping in Account to AccountInteractions
* Introduce shared examples for AccountAvatar inclusion
* Cover Account more
* Fix regression from #3842
Simplify the query by omitting all direct statuses. Private statuses
are allowed because they are from accounts we are following (so
by definition)
Resolves#3887 (alternative)
* Adjust test
The classes using Status.as_home_timeline, namely Feed and
PrecomputeFeedService are expected to filter direct statuses as
FanOutWriteService does, but their filtering were incomplete or missing.
This commit solves the problem by filtering direct statuses in
as_home_timeline as the other similar methods such as as_public_timeline
does.
* Add form for account deletion
* If avatar or header are gone from source, remove them
* Add option to have SuspendAccountService remove user record, add tests
* Exclude suspended accounts from search
* Fix#2619 - When redis feed is empty, fall back to database
* Use redis value to return feed from database only while RegenerationWorker
hasn't finished running
* Fix specs
* Replace usage of reject!
```
DEPRECATION WARNING: The behavior of `attribute_changed?` inside of after callbacks will be changing in the next version of Rails. The new return value will reflect the behavior of calling the method after `save` returned (e.g. the opposite of what it returns now). To maintain the current behavior, use `saved_change_to_attribute?` instead. (called from block in <class:Account> at /Users/rene/Workspace/personal/ruby/mastodon/app/models/account.rb:60)
DEPRECATION WARNING: The behavior of `attribute_changed?` inside of after callbacks will be changing in the next version of Rails. The new return value will reflect the behavior of calling the method after `save` returned (e.g. the opposite of what it returns now). To maintain the current behavior, use `saved_change_to_attribute?` instead. (called from block in <class:Account> at /Users/rene/Workspace/personal/ruby/mastodon/app/models/account.rb:60)
DEPRECATION WARNING: The behavior of `attribute_changed?` inside of after callbacks will be changing in the next version of Rails. The new return value will reflect the behavior of calling the method after `save` returned (e.g. the opposite of what it returns now). To maintain the current behavior, use `saved_change_to_attribute?` instead. (called from block in <class:Account> at /Users/rene/Workspace/personal/ruby/mastodon/app/models/account.rb:60)
DEPRECATION WARNING: The behavior of `attribute_changed?` inside of after callbacks will be changing in the next version of Rails. The new return value will reflect the behavior of calling the method after `save` returned (e.g. the opposite of what it returns now). To maintain the current behavior, use `saved_change_to_attribute?` instead. (called from block in <class:Account> at /Users/rene/Workspace/personal/ruby/mastodon/app/models/account.rb:61)
DEPRECATION WARNING: The behavior of `attribute_changed?` inside of after callbacks will be changing in the next version of Rails. The new return value will reflect the behavior of calling the method after `save` returned (e.g. the opposite of what it returns now). To maintain the current behavior, use `saved_change_to_attribute?` instead. (called from block in <class:Account> at /Users/rene/Workspace/personal/ruby/mastodon/app/models/account.rb:62)
DEPRECATION WARNING: The behavior of `attribute_changed?` inside of after callbacks will be changing in the next version of Rails. The new return value will reflect the behavior of calling the method after `save` returned (e.g. the opposite of what it returns now). To maintain the current behavior, use `saved_change_to_attribute?` instead. (called from block in <class:Account> at /Users/rene/Workspace/personal/ruby/mastodon/app/models/account.rb:63)
```
Here's PR describing changes to Dirty API https://github.com/rails/rails/pull/25337
* Sort results by the name
* Switch search method to simple `LIKE` matching instead of tsvector/tsquery
Previously we used scores from ts_rank_cd() to sort results, but it didn't work
because the function returns same score for all results. It's not for calculate
similarity of single words. Sometimes this bug even push out exact matching tag
from results.
Additionally, PostgreSQL supports prefix searching with standard btree index.
Using it offers simpler code, but also less index size and some speed.
* Add a StatusFilter class to identify visibility of statuses by accounts
* Extract StatusThreadingConcern from Status
* Clarify purpose of checking for nil account
* Update rails to version 5.1.1
* Run `rails app:update`
* Remove the override of polymorphic activity relationship
* Silence warning about otp_secret attribute being unknown to rails
* We will only introduce form_with where we want to use remote data
* Remove trailing whitespace in i18n mailers
* Use query methods instead of #present? on AR attributes
* Delegate Status#account_domain method
* Delegate Mention #account_username and #account_acct methods
* Move specs for account finder methods to concern spec
* Move account finder methods to concern
* Improve spec wording
* Use more explicit comparison to ensure correct return value
* Add coverage for .find_local! and .find_remote!
* Add some methods to the finder
* Use arel on matching_username method
* Avoid ternary in matching domain method
* Simplify finder methods
* Use an AccountFinder class to simplify lookup
* Set delete_modal preference to true by default
* Does not show confirmation modal if delete_modal is false
* Add ja translation for preference setting page
* @object is not needed
* Remove unneeded dependencies
* Do not call private method
* Prefer #respond_to_missing? over #respond_to?
`#respond_to?` doesn't support `User.settings.method(:method_name)`
* Use find_or_initialize_by instead of
* Introduce recent scope to Status and StreamEntry
Introduce recent scope to Status and StreamEntry as Account has.
* Cover AccountsController more in AccountsController
* Add buttons to block and unblock domain
* Relationship API now returns "domain_blocking" status for accounts,
rename "block entire domain" to "hide entire domain", fix unblocking domain,
do not block notifications from domain-blocked-but-followed people, do
not send Salmons to domain blocked users
* Add test
* Personal domain blocks shouldn't affect Salmon after all, since in this
direction of communication the control is very thin when it comes to
public stuff. Best stay consistent and not affect federation in this way
* Ignore followers and follow request from domain blocked folks,
ensure account domain blocks are not created for empty domain,
and avoid duplicates in validation
* Purge followers when blocking domain (without soft-blocks, since they
are useless here)
* Add tests, fix local timeline being empty when having any domain blocks
* Add <ostatus:conversation /> tag to Atom input/output
Only uses ref attribute (not href) because href would be
the alternate link that's always included also.
Creates new conversation for every non-reply status. Carries
over conversation for every reply. Keeps remote URIs verbatim,
generates local URIs on the fly like the rest of them.
* Conversation muting - prevents notifications that reference a conversation
(including replies, favourites, reblogs) from being created. API endpoints
/api/v1/statuses/:id/mute and /api/v1/statuses/:id/unmute
Currently no way to tell when a status/conversation is muted, so the web UI
only has a "disable notifications" button, doesn't work as a toggle
* Display "Dismiss notifications" on all statuses in notifications column, not just own
* Add "muted" as a boolean attribute on statuses JSON
For now always false on contained reblogs, since it's only relevant for
statuses returned from the notifications endpoint, which are not nested
Remove "Disable notifications" from detailed status view, since it's
only relevant in the notifications column
* Up max class length
* Remove pending test for conversation mute
* Add tests, clean up
* Rename to "mute conversation" and "unmute conversation"
* Raise validation error when trying to mute/unmute status without conversation
* Adding account domain blocks that filter notifications and public timelines
* Add tests for domain blocks in notifications, public timelines
Filter reblogs of blocked domains from home
* Add API for listing and creating account domain blocks
* API for creating/deleting domain blocks, tests for Status#ancestors
and Status#descendants, filter domain blocks from them
* Filter domains in streaming API
* Update account_domain_block_spec.rb
