Fixes#15959
Introduced in #6540, OAUTH_REDIRECT_AT_SIGN_IN allowed skipping the log-in form
to instead redirect to the external OmniAuth login provider.
However, it did not prevent the log-in form on /about introduced by #10232 from
appearing, and completely broke with the introduction of #15228.
As I restoring that previous log-in flow without introducing a security
vulnerability may require extensive care and knowledge of how OmniAuth works,
this commit removes support for OAUTH_REDIRECT_AT_SIGN_IN instead for the time
being.
Up until now, we have used Devise's Rememberable mechanism to re-log users
after the end of their browser sessions. This mechanism relies on a signed
cookie containing a token. That token was stored on the user's record,
meaning it was shared across all logged in browsers, meaning truly revoking
a browser's ability to auto-log-in involves revoking the token itself, and
revoking access from *all* logged-in browsers.
We had a session mechanism that dynamically checks whether a user's session
has been disabled, and would log out the user if so. However, this would only
clear a session being actively used, and a new one could be respawned with
the `remember_user_token` cookie.
In practice, this caused two issues:
- sessions could be revived after being closed from /auth/edit (security issue)
- auto-log-in would be disabled for *all* browsers after logging out from one
of them
This PR removes the `remember_token` mechanism and treats the `_session_id`
cookie/token as a browser-specific `remember_token`, fixing both issues.
* Add tests
* Add security-related tests
My first (unpublished) attempt at fixing the issues introduced (extremely
hard-to-exploit) security vulnerabilities, addressing them in a test.
* Fix authentication failures after going halfway through a sign-in attempt
* Refactor `authenticate_with_sign_in_token` and `authenticate_with_two_factor` to make the two authentication steps more obvious
If someone tries logging in to an account and is prompted for a 2FA
code or sign-in token, even if the account's password or e-mail is
updated in the meantime, the session will show the prompt and allow
the login process to complete with a valid 2FA code or sign-in token
* feat: add possibility of adding WebAuthn security keys to use as 2FA
This adds a basic UI for enabling WebAuthn 2FA. We did a little refactor
to the Settings page for editing the 2FA methods – now it will list the
methods that are available to the user (TOTP and WebAuthn) and from
there they'll be able to add or remove any of them.
Also, it's worth mentioning that for enabling WebAuthn it's required to
have TOTP enabled, so the first time that you go to the 2FA Settings
page, you'll be asked to set it up.
This work was inspired by the one donde by Github in their platform, and
despite it could be approached in different ways, we decided to go with
this one given that we feel that this gives a great UX.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: add request for WebAuthn as second factor at login if enabled
This commits adds the feature for using WebAuthn as a second factor for
login when enabled.
If users have WebAuthn enabled, now a page requesting for the use of a
WebAuthn credential for log in will appear, although a link redirecting
to the old page for logging in using a two-factor code will also be
present.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: add possibility of deleting WebAuthn Credentials
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: disable WebAuthn when an Admin disables 2FA for a user
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: remove ability to disable TOTP leaving only WebAuthn as 2FA
Following examples form other platforms like Github, we decided to make
Webauthn 2FA secondary to 2FA with TOTP, so that we removed the
possibility of removing TOTP authentication only, leaving users with
just WEbAuthn as 2FA. Instead, users will have to click on 'Disable 2FA'
in order to remove second factor auth.
The reason for WebAuthn being secondary to TOPT is that in that way,
users will still be able to log in using their code from their phone's
application if they don't have their security keys with them – or maybe
even lost them.
* We had to change a little the flow for setting up TOTP, given that now
it's possible to setting up again if you already had TOTP, in order to
let users modify their authenticator app – given that now it's not
possible for them to disable TOTP and set it up again with another
authenticator app.
So, basically, now instead of storing the new `otp_secret` in the
user, we store it in the session until the process of set up is
finished.
This was because, as it was before, when users clicked on 'Edit' in
the new two-factor methods lists page, but then went back without
finishing the flow, their `otp_secret` had been changed therefore
invalidating their previous authenticator app, making them unable to
log in again using TOTP.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* refactor: fix eslint errors
The PR build was failing given that linting returning some errors.
This commit attempts to fix them.
* refactor: normalize i18n translations
The build was failing given that i18n translations files were not
normalized.
This commits fixes that.
* refactor: avoid having the webauthn gem locked to a specific version
* refactor: use symbols for routes without '/'
* refactor: avoid sending webauthn disabled email when 2FA is disabled
When an admins disable 2FA for users, we were sending two mails
to them, one notifying that 2FA was disabled and the other to notify
that WebAuthn was disabled.
As the second one is redundant since the first email includes it, we can
remove it and send just one email to users.
* refactor: avoid creating new env variable for webauthn_origin config
* refactor: improve flash error messages for webauthn pages
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
When attempting to access the log-in page while already logged in,
Devise's `require_no_authentication` kicks in and sets a flash
message “You are already signed in.”
In almost all cases, this also causes a redirect to /web, which
does not display or clear flash messages, thus leaving the message
to a potentially much later date, like for instance, accessing
/preferences several minutes after being redirected to /web.
Allow access to account settings, 2FA, authorized applications, and
account deletions to unconfirmed and pending users, as well as
users who had their accounts disabled. Suspended users cannot update
their e-mail or password or delete their account.
Display account status on account settings page, for example, when
an account is frozen, limited, unconfirmed or pending review.
After sign up, login users straight away and show a simple page that
tells them the status of their account with links to account settings
and logout, to reduce onboarding friction and allow users to correct
wrongly typed e-mail addresses.
Move the final sign-up step of SSO integrations to be the same
as above to reduce code duplication.
* Add force_login option to OAuth authorize page
For when a user needs to sign into an app from multiple accounts
on the same server
* When logging out from modal header, redirect back after re-login
* Allow moderators to disable/enable login
* Instead of rejecting login, show forbidden error when login disabled
Avoid confusion because when login is rejected, the message is that
the account is not activated, which is wrong.
* Fix tests
When case insensitivity is enabled via devise's `config.case_insensitive_keys` then `.find_for_authentication` method needs to be used instead of `.find_by` because second mentioned returns `nil` when valid email with different cases is passed.
More info https://github.com/plataformatec/devise/wiki/How-To:-Use-case-insensitive-emails
In single user mode, visitors are redirected to the single user's
profile page. So, if you are the owner without a session, you start
from that page, click the login button and authenticate yourself
expecting you'll soon get started with the home page, but in reality
you'll get redirected back to where you started from -- your own
profile page.
This fixes the behavior by redirecting you home after login if you
have started from your own profile page.
* Add recovery code support for two-factor auth
When users enable two-factor auth, the app now generates ten
single-use recovery codes. Users are encouraged to print the codes
and store them in a safe place.
The two-factor prompt during login now accepts both OTP codes and
recovery codes.
The two-factor settings UI allows users to regenerated lost
recovery codes. Users who have set up two-factor auth prior to
this feature being added can use it to generate recovery codes
for the first time.
Fixes#563 and fixes#987
* Set OTP_SECRET in test enviroment
* add missing .html to view file names
Claire
Eugen Rochko
Truong Nguyen
santiagorodriguez96
abcang
ThibG
luzpaz
Sorin Davidoi
Ghislain Loaec
Alexander
takayamaki
René Klačan
unarist
Akinori MUSHA
Matt Jankowski
yhirano
Patrick Figel