* Add support for followers synchronization on the receiving end
Check the `collectionSynchronization` attribute on `Create` and `Announce`
activities and synchronize followers from provided collection if possible.
* Add tests for followers synchronization on the receiving end
* Add support for follower synchronization on the sender's end
* Add tests for the sending end
* Switch from AS attributes to HTTP header
Replace the custom `collectionSynchronization` ActivityStreams attribute by
an HTTP header (`X-AS-Collection-Synchronization`) with the same syntax as
the `Signature` header and the following fields:
- `collectionId` to specify which collection to synchronize
- `digest` for the SHA256 hex-digest of the list of followers known on the
receiving instance (where “receiving instance” is determined by accounts
sharing the same host name for their ActivityPub actor `id`)
- `url` of a collection that should be fetched by the instance actor
Internally, move away from the webfinger-based `domain` attribute and use
account `uri` prefix to group accounts.
* Add environment variable to disable followers synchronization
Since the whole mechanism relies on some new preconditions that, in some
extremely rare cases, might not be met, add an environment variable
(DISABLE_FOLLOWERS_SYNCHRONIZATION) to disable the mechanism altogether and
avoid followers being incorrectly removed.
The current conditions are:
1. all managed accounts' actor `id` and inbox URL have the same URI scheme and
netloc.
2. all accounts whose actor `id` or inbox URL share the same URI scheme and
netloc as a managed account must be managed by the same Mastodon instance
as well.
As far as Mastodon is concerned, breaking those preconditions require extensive
configuration changes in the reverse proxy and might also cause other issues.
Therefore, this environment variable provides a way out for people with highly
unusual configurations, and can be safely ignored for the overwhelming majority
of Mastodon administrators.
* Only set follower synchronization header on non-public statuses
This is to avoid unnecessary computations and allow Follow-related
activities to be handled by the usual codepath instead of going through
the synchronization mechanism (otherwise, any Follow/Undo/Accept activity
would trigger the synchronization mechanism even if processing the activity
itself would be enough to re-introduce synchronization)
* Change how ActivityPub::SynchronizeFollowersService handles follow requests
If the remote lists a local follower which we only know has sent a follow
request, consider the follow request as accepted instead of sending an Undo.
* Integrate review feeback
- rename X-AS-Collection-Synchronization to Collection-Synchronization
- various minor refactoring and code style changes
* Only select required fields when computing followers_hash
* Use actor URI rather than webfinger domain in synchronization endpoint
* Change hash computation to be a XOR of individual hashes
Makes it much easier to be memory-efficient, and avoid sorting discrepancy issues.
* Marginally improve followers_hash computation speed
* Further improve hash computation performances by using pluck_each
There are edge cases where requests to certain hosts timeout when
using the vanilla HTTP.rb gem, which the goldfinger gem uses. Now
that we no longer need to support OStatus servers, webfinger logic
is so simple that there is no point encapsulating it in a gem, so
we can just use our own Request class. With that, we benefit from
more robust timeout code and IPv4/IPv6 resolution.
Fix#14091
* Add bell button
Fix#4890
* Remove duplicate type from post-deployment migration
* Fix legacy class type mappings
* Improve query performance with better index
* Fix validation
* Remove redundant index from notifications
* Add database support for list show-reply preferences
* Add backend support to read and update list-specific show_replies settings
* Add basic UI to set list replies setting
* Add specs for list replies policy
* Switch "cycling" reply policy link to a set of radio inputs
* Capitalize replies_policy strings
* Change radio button design to be consistent with that of the directory explorer
* Make Array-creation behavior of Paginable more predictable
Paginable.paginate_by_id usually returns ActiveRecord::Relation, but it
returns an Array if min_id option is present. The behavior caused problems
fixed with the following commits:
- 976938bf30
- 5a8fa3ad95
- 1c70d8189c
To prevent from recurring similar problems, this commit introduces two
changes:
- The scope now always returns an Array whether min_id option is present
or not.
- The scope is renamed to to_a_paginated_by_id to clarify it returns an
Array.
* Transform Paginable.to_a_paginated_by_id from a scope to a class method
https://api.rubyonrails.org/classes/ActiveRecord/Scoping/Named/ClassMethods.html#method-i-scope
> The method is intended to return an ActiveRecord::Relation object, which
> is composable with other scopes.
Paginable.to_a_paginated_by_id returns an Array and is not appropriate
as a scope.
* feat: add possibility of adding WebAuthn security keys to use as 2FA
This adds a basic UI for enabling WebAuthn 2FA. We did a little refactor
to the Settings page for editing the 2FA methods – now it will list the
methods that are available to the user (TOTP and WebAuthn) and from
there they'll be able to add or remove any of them.
Also, it's worth mentioning that for enabling WebAuthn it's required to
have TOTP enabled, so the first time that you go to the 2FA Settings
page, you'll be asked to set it up.
This work was inspired by the one donde by Github in their platform, and
despite it could be approached in different ways, we decided to go with
this one given that we feel that this gives a great UX.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: add request for WebAuthn as second factor at login if enabled
This commits adds the feature for using WebAuthn as a second factor for
login when enabled.
If users have WebAuthn enabled, now a page requesting for the use of a
WebAuthn credential for log in will appear, although a link redirecting
to the old page for logging in using a two-factor code will also be
present.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: add possibility of deleting WebAuthn Credentials
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: disable WebAuthn when an Admin disables 2FA for a user
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: remove ability to disable TOTP leaving only WebAuthn as 2FA
Following examples form other platforms like Github, we decided to make
Webauthn 2FA secondary to 2FA with TOTP, so that we removed the
possibility of removing TOTP authentication only, leaving users with
just WEbAuthn as 2FA. Instead, users will have to click on 'Disable 2FA'
in order to remove second factor auth.
The reason for WebAuthn being secondary to TOPT is that in that way,
users will still be able to log in using their code from their phone's
application if they don't have their security keys with them – or maybe
even lost them.
* We had to change a little the flow for setting up TOTP, given that now
it's possible to setting up again if you already had TOTP, in order to
let users modify their authenticator app – given that now it's not
possible for them to disable TOTP and set it up again with another
authenticator app.
So, basically, now instead of storing the new `otp_secret` in the
user, we store it in the session until the process of set up is
finished.
This was because, as it was before, when users clicked on 'Edit' in
the new two-factor methods lists page, but then went back without
finishing the flow, their `otp_secret` had been changed therefore
invalidating their previous authenticator app, making them unable to
log in again using TOTP.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* refactor: fix eslint errors
The PR build was failing given that linting returning some errors.
This commit attempts to fix them.
* refactor: normalize i18n translations
The build was failing given that i18n translations files were not
normalized.
This commits fixes that.
* refactor: avoid having the webauthn gem locked to a specific version
* refactor: use symbols for routes without '/'
* refactor: avoid sending webauthn disabled email when 2FA is disabled
When an admins disable 2FA for users, we were sending two mails
to them, one notifying that 2FA was disabled and the other to notify
that WebAuthn was disabled.
As the second one is redundant since the first email includes it, we can
remove it and send just one email to users.
* refactor: avoid creating new env variable for webauthn_origin config
* refactor: improve flash error messages for webauthn pages
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
Since #14145, the `set_type_and_extension` has been moved from
`before_post_process` to `before_file_post_process`, but while the former
runs before all validations performed by Paperclip, the latter is dependent
on the order validations and hooks are defined.
In our case, this meant video files could be checked against the generic 10MB
limit, causing validation failures, which, internally, make Paperclip skip
post-processing, and thus, transcoding of the video file.
The actual validation would then happen after the type is correctly set, so
the large file would pass validation, but without being transcoded first.
This commit moves the hook definition so that it is run before checking for
the file size.
* Add UserNote model
* Add UI for user notes
* Put comment in relationships entity
* Add API to create user notes
* Copy user notes to new account when receiving a Move activity
* Address some of the review remarks
* Replace modal by inline edition
* Please CodeClimate
* Button design changes
* Change design again
* Cancel note edition when pressing Escape
* Fixes
* Tweak design again
* Move “Add note” item, and allow users to add notes to themselves
* Rename UserNote into AccountNote, rename “comment” Relationship attribute to “note”
- Change audio files to not be stripped of metadata
- Automatically extract cover art from audio if it exists
- Add `thumbnail` parameter to `POST /api/v1/media`, `POST /api/v2/media` and `PUT /api/v1/media/:id`
- Add `icon` to represent it in attachments in ActivityPub
- Fix `preview_url` containing URL of missing missing image when there is no thumbnail instead of null
- Fix duration of audio not being displayed on public pages until the file is loaded
- Fix audio attachments not being represented in OpenGraph tags
- Fix audio being represented as "1 image" in OpenGraph descriptions
- Fix video metadata being overwritten by paperclip-av-transcoder
- Fix embedded player not using Mastodon's UI
- Fix audio/video progress bars not moving smoothly
- Fix audio/video buffered bars not displaying correctly
* Fix admin page crashing when trying to block an invalid domain name
Fixes#13880
* Fix trailing and leading spaces not being properly stripped for domain blocks
* Improve RSS entries for statuses
- Render polls in both accounts and tags serializers
- Refactor RSS serializers
- Change title preview to include ellipsis when truncated
- Change title preview to show CW instead of toot text
- Add tests
* Remove title from OEmbed serialization
Twitter doesn't serialize title either, and tihs allows us to move the
title formatting code to the RSS serializers.
When deduplicating account usernames for OAuthable users, the routine did check if any account was known with that username, including remote accounts. This caused some unnecessary deduplication, and usernames ending with unexpected trailing _1.
This fixes#13580
Follow-up to #13452, fixing broken `uri.nil?` test.
Also remove the separate check for `uri` presence, as that would result
in a “Please review 2 errors below” while only one would be listed.
* Fix “Email changed” notification sometimes having wrong e-mail
Fixes#6778
The root of the issue is that `send_devise_notification` was called before
the changes were properly commited to the database, causing the mailer to
pick previous values if running too early.
Devise's documentation provides guidance on how to handle that[1][2], however,
I have found it to not be working, as the following happens, in that order:
- `send_devise_notification` is called for the `email_changed` notification.
In that case, `changed?` is false and `saved_changes?` is true, so
if we use the former, we have the same issue.
- the `after_commit` hook is called
- `send_devise_notification` is called for the `confirmation_instructions`
notification.
In that case, `changed?` is still false, and `saved_changes?` still true,
so if we use the latter, that second notification email is simply not
going to be sent (as we would be queuing the notification *after*
executing the after_commit hook).
This is because it may be called from either an `after_update` or
`after_commit` hook, the difference not being a call to `save` but the
transaction actually being committed to the database. This may arguably
be a bug in Devise, or Devise's notification.
The proposed workaround is inspired by Devise's documentation but checks
whether a transaction is open to make the call whether to immediately
send the notification or defer it to the `after_commit` hook.
[1]: https://www.rubydoc.info/github/plataformatec/devise/Devise%2FModels%2FAuthenticatable:send_devise_notification
[2]: 406915cb78/lib/devise/models/authenticatable.rb (L133-L194)
* Fix cases when sending notifications without changing the model
* Defer sending if and only if in transaction including current record
* Fix PostgreSQL load when linking in announcements
Fixes#13245 by caching status lookups
Since statuses are supposed to be known already and we only
need their URLs and a few other things, caching them should
be fine.
Since it's only used by announcements so far, there won't
be much statuses to cache.
* Perform status lookup when saving announcements, not when rendering them
* Change EntityCache#status to fetch URLs instead of looking into the database
* Move announcement link lookup to publishing worker
* Address issues pointed out during review
* Change ActivityPub follower/following collections to not link first page
* Add support for hiding followers and following of remote users
* Switch to using a single `hide_collections` column
* Address code style remarks
Change `all_day` to be a visual client-side cue only
Publish immediately if `scheduled_at` is in the past
Add `published_at` and `updated_at` to announcements JSON
While making browser requests in the other sessions after a password
change or reset does not allow you to be logged in and correctly
invalidates the session making the request, sessions have API tokens
associated with them, which can still be used until that session
is invalidated.
This is a security issue for accounts that were already compromised
some other way because it makes it harder to throw out the hijacker.
* Add announcements
Fix#11006
* Add reactions to announcements
* Add admin UI for announcements
* Add unit tests
* Fix issues
- Add `with_dismissed` param to announcements API
- Fix end date not being formatted when time range is given
- Fix announcement delete causing reactions to send streaming updates
- Fix announcements container growing too wide and mascot too small
- Fix `all_day` being settable when no time range is given
- Change text "Update" to "Announcement"
* Fix scheduler unpublishing announcements before they are due
* Fix filter params not being passed to announcements filter
Allow browsing and filtering all relationships instead of just
followers, unify the codebase with the user-facing relationship
manager, add ability to see who the user invited
* Fix unused role routes being generated
* Remove unused JavaScript code
* Refactor filters code to be DRYer
* Fix `.count == 0` comparisons to `.empty?` in views
* Fix filters in views
Fixes#12795
It was already possible to create domain blocks for TLDs, but those
weren't enforced, nor editable. This commit changes it so that they
are enforced and editable.
This changes the REST API to return unicode domains in the `acct`
attribute instead of punycode, and to render unicode instead of
punycode on public HTML pages as well.
Fix#7812, fix#12246
* Revert "Fix ignoring whole status because of one invalid hashtag (#11621)"
This reverts commit 123ffd0a45.
* Fix statuses being rejected because of invalid hashtag names
* Add spec for invalid hashtag names in statuses
* Add test for featured tags controller
* Show badge on group actor in WebUI
* Do not notify in case of by following group actor
* If you mention group actor, also mention group actor followers
* Relax characters that can be used in username (same as Application)
* Revert "Relax characters that can be used in username (same as Application)"
This reverts commit 7e10a137b878d0db1b5252c52106faef5e09ca4b.
* Delete display_name method
